CHAPTER 6
50
51
MXm
To set the two power outputs:
n
enter Power output page
n
mouse over the power output you want to set
n
setting icon appears on the right of the power output row: click it
The setting panel appears: fill it in. In the example Power output 1 has been configu-
red to manage a fan: it turns ON when Water temperature is greater than 90°C: Max
accepted current (Maximum value of requested Loan) is 8 Amp: over this value the
output circuit opens and the read status becomes “Overcurrent”.
6.2.9 Display settings
MXm can have up to eight pages to be set via software. Each page can have from 1
to 4 fields and can be set as you prefer.
n
enter “Display” tab
n
a panel shows up where you can select the display page you prefer
(in the example a four fields page with bar graph has been chosen)
n
select the page and press “OK”
n
repeat the operation for the number of pages you want to set
MANUALE MXm 1.00 2018.qxp_Layout 1 01/08/18 15:08 Pagina 51
