CHAPTER 6
44
45
MXm
On top you can set your MXm shift lights working mode. Available options are shift
lights (default) and predictive time.
Use as gear Shift Lights.
To use the led bar as shift lights click the setting icon ( )
and the related panel shows up.
You can
n
import/export shift lights setting using the proper buttons
n
decide the sequence mode of the LEDs enabling the desired option:
n
a LED stays on if its threshold is exceeded
n
a LED stays on until another LED with higher threshold turns on or
n
link the shift lights to the engaged gear enabling the related checkbox; in this last
case you need to fill in max gear number and set LEDs colours and threshold values
for each gear.
Use for predictive time.
To use the LED bar for predictive lap time enable the related
option and press the setting icon ( ).
You can
n
import/export shift lights setting using the proper buttons
n
decide the sequence mode of the LEDs enabling the desired option:
n
a LED stays on if its threshold is exceeded
n
a LED stays on until another LED with higher threshold turns on or
n
fill in the predictive time increment of each LED. The LED value indicates the time
gap to be assigned to each LED. Assuming you fill in “0.1” and your lap time is impro-
ving of 0.3 sec toward the reference lap, your MXm will switch on 3 LEDs green; if, on
the contrary, your lap time is worsening the LEDs will switch on red.
The lap considered as reference is the best one of the current session.
MANUALE MXm 1.00 2018.qxp_Layout 1 01/08/18 15:08 Pagina 45
