CHAPTER 6
36
37
MXm
To set
Speed
channels click on the row and a setting panel appears. In addition to
sampling frequency, unit of measure and display parameters, you can choose:
n
Function: Vehicle speed, Angular velocity, Speed, Turbo RPM
n
Sensor: Speed sensor or ABS speed
n
Speed parameters in the proper bottom box
Please note:
if you set one speed as ABS Speed the second will switch to ABS speed
too as shown here below.
To set the four
Analog channels
click on the related row, a setting panel appears and
you can choose function, sensor type, measure units, display precision or specific pa-
rameters.
6.2.2 ECU Connection and configuration
MXm can be connected to your vehicle ECU. When possible documents explaining
how to connect your MXm to your vehicle ECU are published on our website
www.aim-sportline.com. As explained, MXm can communicate using all currently
available communication lines: CAN, RS232, K-Line.
To load the ECU protocol in MXm configuration:
n
enter “ECU Stream” tab
n
press “Change ECU” button
n
elect ECU Manufacturer and ECU Model (in the example FORD/ MUSTANG 2010)
n
press OK
MANUALE MXm 1.00 2018.qxp_Layout 1 01/08/18 15:08 Pagina 37
