CHAPTER 6
42
43
MXm
Parameters page is divided in two parts.
n
on top
GPS Lap detection
parameters; mousing over the question marks a pop
up message will explain you the working mode of:
n
hold lap time for: the time period for which lap time is shown on your
MXm display
n
the track width: width that will be considered for any GPS point you set
n
bottom
Start data recording
conditions;
n
standard conditions (default setting) make MXm start recording when RPM
is higher than 500 or speed is higher than 10 km/h and switches MXm Wi-Fi off
n
custom conditions: you can set two conditions and decide if making MXm start
recording when only one of them is reached (“ANY”) or when both are satisfied (“ALL”);
pressing the button it sets the condition as shown here below.
6.2.6 Parameters settings
In this page you can set shift lights (on top) and set the alarm led (bottom) of your
MXm.
6.2.7 Shift Lights and Alarms
MANUALE MXm 1.00 2018.qxp_Layout 1 01/08/18 15:08 Pagina 43
