![background image](http://html.mh-extra.com/html/aim/fd400/fd400_user-manual_2871813019.webp)
This can be used to ensure the fluid does not harden in the tip while the program is
running or to wipe the tip.
The parameters and the Purge Point must be defined in the Purge Node. Select
Purge Point in the program tree.
This node will run in the program tree, if inserted.
If a Halt command is added at Purge Position, and the Clean Cycle is active, the
cleaning cycle will start.
PROGRAMMING
Aim Purge Node
16