* The 8 pin connector lead
Ensure Tool IO voltage is set to 'zero' or robot is off before attaching tool.
Refer to the 'How to' page for guidance.
If robot shows error after attaching tool - restart the robot to reset.
Position the lead from the unit to the robot so that it does not create a risk.
The pin can be inserted for orientation.
Attach NPT1/4" connector
with feeding line to inlet
(F)
While the robot is off or
tool I/O is zero: Plug in
the 8 pin connector* into
unit and robot.
Assemble unit and attach to robot
Attach unit to robot flange
with 4 screws
F
D
h
ig
h
V
6
LED indicator (D)
The unit has a LED indicator. When the unit has power a steady light is shown.
INSTALLATION: FDhighV