ACE1553-3U-4 Hardware Manual
2
How This Manual is Organized
1.2
Section 1
-
INTRODUCTION
- contains an overview of this manual.
Section 2
-
INSTALLATION
- describes the steps required to install the ACE1553 device,
and connect the device to other external interfaces including the MIL-STD-1553
Bus, IRIG-B, and triggers.
Section 3
-
STRUCTURE OF THE ACE1553-3U-4
- describes the physical hardware
interfaces on the ACE1553 using a block diagram and a description of each main
component
Section 4
-
TECHNICAL DATA
- describes the technical specification of the ACE1553.
Applicable Documents
1.3
The following documents shall be considered to be a part of this document to the extent that
they are referenced herein. In the event of conflict between the documents referenced and the
contents of this document, the contents of this document shall have precedence.
1.3.1 Industry Documents
[1]
PXI Express Hardware Specification
– Rev. 1.0 – Aug. 22, 2005
[2]
PXI Hardware Specification
– Rev. 2.2 – September 22, 2004
[3]
MIL-STD-1553B, Department of Defence Interface Standard for Digital Time
Division Command/Response Multiplex Data Bus, Notice 1-4, January 1996
1.3.2 Product Specific AIM Documents
[4]
AIM - Reference Manual ACE1553 Application Interface Library Detailed description of
the programming interface.
Summary of Contents for ACE1553-3U-4
