4
Collision Hazards
4.
WARNING
• Before traveling, check the arrow decals
affi
xed on the chassis to make sure the
traveling direction of the machine.
M085D122
Forward
(Green)
Backward
(Red)
Forward
(Green)
Backward
(Red)
fi g. 1‒15
• Make sure that no person or obstacle is
around the machine. Be aware of blind
spots when traveling or operating. If
your vision is poor, have a guide to assist
you.
• The turntable protrudes 850 mm
beyond the width of the chassis when
rotating the boom, so watch the
turntable movement and make sure
that no person or obstacle is around the
turntable.
M0863201
850 mm
fi g. 1‒16
• Check the work area for overhead
obstacles or other possible hazards.
• Do not hit structures etc. with the
platform while traveling.
M085E901
fi g. 1‒17
• Do not hit the ground with the platform.
M085F100
fi g. 1‒18
• Once the platform is raised, do not allow
people or things under the platform.
M07Y9J02
fi g. 1‒19
• Do not lower the boom unless the area
below is clear of persons and obstacles.
• When you are obliged to get under
the boom and platform to perform
the inspections or repairs, use a safety
support to prevent the boom and the
platform from unexpected descent.
• Do not drop things from the platform.
There is a hazard that falling objects will
hit cars, or people that are passing by.
M07Y9L02
fi g. 1‒20
• Take care that your hands on the
guardrails are not caught in other
obstacles.
