20
Lower Controls
3.
(17)
(13)
(2)
(9)
(8)
(1)
(4)
(5)
(6)
(7)
(10)
(11)
(3)
(12)
(14)
(16)
(15)
M082N302
A
(18)(19)
(21)
(26)
(20)
(25)
(24)(23)
(27)
(22)
A
fi g. 4‒3
(1) Boom Elevation Switch
Operate this switch up and the boom will
raise. Operate this switch down and the
boom will lower.
(2) Boom Rotation Switch
Operate this switch up and the boom
will rotate counterclockwise. Operate this
switch down and the boom will rotate
clockwise.
(3) Boom Telescope Switch
Operate this switch to the left and the
boom will retract. Operate this switch to
the right and the boom will extend.
(4) Fly Jib Switch (If equipped)
Operate this switch up and the fl y jib will
raise. Operate this switch down and the fl y
jib will lower.
(5) Emergency Stop Button
Push in this button to “OFF”
and all functions will stop. Pull
out this button to “ON” and
the machine will operate.
(6) Platform Rotation Switch
Operate this switch up and the platform
will rotate counterclockwise. Operate this
switch down and the platform will rotate
clockwise.
(7) Platform Level Adjust Switch
Operate this switch up and the platform
level will tilt up. Operate this switch down
and the platform level will tilt down.
(8) Pre-start Check Switch
Follow the instruction and
hold this switch up when the
pre-start check is performed.
(9) Not use
(10) Rotating Beacon Switch
(Option)
Turn on this switch and the
rotating beacon will light on.
(11) Not use
(12) Function Speed Select Switch
• Select “RABBIT” for a high
speed function.
• Select “TURTLE” for a low
speed function.
(13) Engine Start Switch /
Emergency Pump Switch
• Operate this switch up without
operating the enable switch
and the engine will start.
• Hold this switch down to
operate the machine with
emergency pump. (Refer to
Chapter 9 for details)
(14) Key Switch for Upper Control /
Off / Lower Control Selection
Turn the key switch to the left
and the upper controls will
operate.
Turn the key switch to center
position and the machine will
be off .
Turn the key switch to the
right and the lower controls
will operate.
(15) Fuse Holder
(16) Hour Meter
The hour meter works only when the
engine is in motion.
