I-78
H-093630_EN • 00
A
dditionAl
i
nformAtion
for
the
i
nstAller
Appliance Settings for the Installer
Access Levels
Three different levels of settings are available for the
Installer : End user level, Commissioning level and
Engineer level. A fourth level, OEM, is only accessi-
ble at factory level, through the use of a code.
Each level allows to set certain specific parame-
ters or program the appliance, according to the
installed circuits.
The menus of the End user level are described in
“Operating the Controller - End User Level” on
page U-22.
The menus for the qualified professional
(Commissioning and Engineer) are described in the
following pages.
To access the Commissioning and the Engineer
levels, proceed as follows:
Menus and Settings
The table on the following page contains some of
the menus and submenus for the installer. The last
column allows the installer to write down the setting
defined for each parameter at installation, if it is dif-
ferent from the default.
For any question related to the menus, please con-
tact AIC’s technical support.
Selecting the User Level
Expert
End user
Symbols used for the
operation of the selector
:
turn the selector to the left or to the right.
depress shortly the rotary selector.
turn the selector to adjust the value, then depress the se-
lector to validate.
Select user level
End user
Select user level
Engineer
Select user level
Continue
Login successful
Accessible for engineer
The process is identical to
access the commissioning
level.
i