AIC TEXAS 230, Installation And Maintenance Manual, Page: 49 / 92

Fig. 22. Accessing the Electronic Board and High & Low voltage Terminal Strips
2
4
1
3
I-49
H-093630_EN • 00
P
roduct
I
nstallatIon
Conditions:
Tools and material:
î
Wrench, hex head, size 4
Procedure:
Electronic Board and Low Voltage Terminal Strip:
1. Open the front door, see “Opening and
Closing the Front Door and Access Pan-
els” on page I-29 .
OFF
Accessing the Electronic Board and Low
and High Voltage Terminal strips
Make sure that the power supply to
the appliance is deactivated (pow-
er supply cable disconnected from
the appliance) before accessing the
high voltage terminal strip.
2. Remove one screw (
1
) from the top of the
panel. Retain for installation.
3. Lift and carefully remove the access panel (
2
)
of the electronic bay.
High Voltage Terminal Strip:
1. Remove two screws (
3
) from the access panel (
4
).
Retain the panel and hardware for reinstallation.
Follow-on tasks:
1. Proceed in the reverse order to reinstall the
access panels back in position.
2. Close the front door, refer to “Opening and
Closing the Front Door and Access Panels” on
page I-29 .