î
The appliance must be in-
stalled in a dry and protect-
ed area, with an ambient
temperature comprised be-
tween 0 and 45°C.
î
Make sure to protect the appliance
and the water circuit against freezing.
î
The appliance must be installed to en-
sure easy access at all times.
î
Use an appropriate means of handling,
suitable to the appliance size and weight.
î
Floor-standing appliances must be in-
stalled on a level base and wall-hung
appliances, on a vertically plumb sup-
port. Material used for base and sup-
port must have suffi cient strength to
support the appliance weight, water
included.
î
Make sure that the appliance is installed
with a suffi cient height to allow the con-
densates to fl ow to the sewer, and/or
allow the installation of a condensate
neutralisation system (as required).
î
When lifting, moving or installing the
appliance, be careful not to drop it.
Once in position, make sure that the
appliance is secured.
î
Install all pipes and ducts without stress
to prevent any leaks from occurring.
î
When the appliance is con-
nected to the electrical net-
work, it must be earthed.
î
Make sure that a fuse or circuit breaker
of the recommended rating (B10A or ac-
cording to applicable local regulations) is
installed outside the appliance, so as to
be able to shut the power down.
î
Do not touch the appliance with any
wet body parts when it is supplied with
electrical power.
î
Before performing any operation on
the electrical circuit, isolate the electri-
cal supply of the appliance through the
external power-cutting device (fuse,
circuit breaker, etc.)
î
All connections (electrical, fl ue pipe,
hydraulic, gas) must be carried out in
accordance with current standards
and regulations in force.
î
If the appliance is installed against a wall
made of heat-sensitive material, such
as wood, a suitable insulation must be
provided by the installer between the
appliance and the wall surface.
î
Comply with the clearance dimen-
sions provided in this manual, to pre-
vent any hot part of the appliance
from being too close to the walls or
any combustible material.
î
Make sure to maintain a safe distance
of 200 mm from fl ammable materials;
the boiler room may not be used as a
storage location for material.
î
Do not store any fl ammable, corrosive
or explosive products next to the appli-
ance.
î
Do not install the appliance in a loca-
tion where chemical vapours or dust are
present in the ambient or combustion air.
î
If the appliance is used on professional
premises such as hairdresser’s, clean-
ing company, painter’s, etc. where
chloride products, solvents, paints,
dust, etc. are likely to contaminate the
air, make sure to install the appliance
in a dedicated boiler room so that the
appliance is supplied with clean com-
bustion air.
î
Install a condensate neutralisation
system according to the applicable
local regulations and standards.
î
If the appliance is intended to be
used with G31 liquefi ed petroleum
gas (propane), installing the appli-
ance below ground level can be
hazardous and prohibited in some
countries. Please refer to applicable
local regulations for installation re-
quirements.
U-26
H-093630_EN • 00
P
roduct
I
nstallatIon
Safety Instructions for the Installation