U-22
H-093630_EN • 00
I
nstructIons
for
the
u
ser
Operating the Controller - End User Level
14:42
Temperature 35°C
Nominal setpoint
60°C
Some parameters are only visible if
the circuit is installed and enabled.
i
Icons
In the work area
Selectable/
Adjustable
Parameters
Remark
Home
Temperature: ---°C
—
This value indicates the
current temperature, as
detected by the system
sensors
Nominal setpoint: ---°C
—
DHW
temp.
setting
Ҙ
Operating mode
Off
On
When “Off ”, Hot water heat-
ing is switched off ; when
“On”, Hot water is heated to
the nominal setpoint as per
time program
Ҙ
Temporary
...
Recharging
“Recharging” is used to bring
the storage tank to the nom-
inal setpoint when there was
a high consumption. “...” de-
activates the function.
Ҙ
Nominal setpoint
60°C
Ҙ
Time program
—
Active if operating mode is
set to “On”.