I-66
F-084392_EN • B
A
dditionAl
i
nformAtion
for
the
i
nstAller
Boiler Settings for the Installer
Access Levels
Three different levels of settings are available for the
Installer : End user level (Eu), Commissioning level
(C) and Engineer level (E). A fourth level, OEM, is
only accessible at factory level, through the use of
a code.
Each level allows to set certain specific parameters
or program the boiler, according to the installed cir-
cuits.
The menus of the End user level are described in
“Operating the Controller - End User Level” on
page U-20.
The menus for the qualified profession-
al (Commissioning and Engineer) are described in
the following pages.
To access the Commissioning and the Engineer
levels, proceed as follows:
Menus and Settings
The following table contains some of the menus
and submenus for the installer. The last column al-
lows the installer to write down the setting defined
for each parameter at installation, if it is different from
the default.
For any question related to the menus, please con-
tact AIC’s technical support.
Selecting the User Level
Expert
Enduser
Symbols used for the
operation of the selector
:
turn the selector to the left or to the right.
depress shortly the rotary selector.
turn the selector to adjust the value, then depress the se-
lector to validate.
Select user level
Enduser
Select user level
Engineer
Select user level
Continue
Login successful
Accessible for engineer
The process is identical to
access the commission-
ing level.
i
