G-11
F-084392_EN • B
P
roduct
d
escriPtion
Fig. 4. Typical Display
30.12.2019
14:42
Flow temp
35°C
Return temp
32°C
Outside temp
18°C
DHW temp
55°C
System
Automatic
2
1
3
4
5
Symbols and Messages on the Control
Panel
The control panel display is divided into several
zones (See
Fig. 4):
î
a
vertical menu bar
(
1
) on the left side of the
screen, comprising a series of icons to access
various menus. When one of the icon is select-
ed and active, it displays against a black back-
ground (
2
). When one icon is selected and ac-
tivated by pressing the selector, the menu bar
disappears and gives way to the work area.
î
a
horizontal status bar
(
3
) at the top of the
screen. It permanently displays the time and,
according to the situation, specific icons (Alarm,
Maintenance, Event, Manual adjustment, User
level and Producer in operation). See a detail of
the symbols below.
î
a
work area
(
4
), comprising menu and func-
tion-specific information as well as operating
mode. It also displays a
back arrow
(
5
), allow-
ing to exit the work area and go back to the
vertical menu bar.
Service/settings
. Gives access to setting op-
tions on device or system, allows to operate
special operations (e.g. for maintenance work)
and allows to log in, in expert view (access to
additional pages for the Installer only).
Diagnostics
(Expert only). Analyze and test
info on the system.
Adjust/repair
(Expert only). Allows to adjust
the parameters in the ‘Complete parameter
list’, and to access the commissioning wizard.
Symbols appearing in the
horizontal status bar
:
Alarm
. Indicates an error in the system.
Maintenance/Special operations
. It indi-
cates the presence of a maintenance mes-
sage or special operation feedback.
Manual mode
. Indicates that the operating
modes on the topic pages are set to manual.
User type
. This symbol with number 1, 2 or
3 indicates the access level:
1 - End user/commissioning
2 - Heating engineer/installer
3 - OEM
Producer
. This symbol indicates the main
producer (e.g. oil/gas boiler, heat pump) that
is currently switched on.
Symbols and indications In the
work area
:
abc
Selected item (text or icon)
abc
Activated item (text or icon)
Back
To go back to higher level in the menu
To return to the vertical menu bar icons
Symbols used in the manual to illustrate the
oper-
ation of the selector
:
turn the selector to the left or to the right
depress shortly the rotary selector
depress the rotary selector for more than
3 seconds.
Symbols of the
vertical menu bar
(some of them
will appear only if the circuit is enabled):
Home
. Gives access to the System status
and change it from
automatic
to
off
.
Temperature
. Gives access to the heating
functions and setpoints.
Ventilation
. Not used.
Domestic Hot Water
. Gives access to the
DHW-related functions.
Information
. Gives access to messages
(history, errors, etc.), system information and
consumption information.
