18
Chapter 2. Hardware Setup
J4078-01 User Manual
2�6 Removing and Installing the HDD Backplane Module
NOTE
Before you pull out the HDD backplane, your must remove all the HDD trays and
cables.
2�6�1 Installing the HDD Backplane
Step 1
Position the HDD backplane module into the chassis and
secure the screws x 12 pcs onto the enclosure (8 screws on the HDD
backplane, 4 screws on the HDD backplane tray).
Step 2
Position the brackets x 4 on the top of the HDD
backplane module and secure the screws x 8 pcs
(1 bracket with 2 screws each).
Step 3
Repeat step 1 and step 2 to install the second
backplane.
2�6�2 Removing the HDD Backplane
Step 1
Remove the HDD disk trays from the enclosure.
Step 2
Remove the top brackets x 4 from the chassis by
removing the screws x 8 pcs (1 bracket with 2 screws each).
Step 3
Remove the screws x 12 pcs on the HDD backplane
module (8 screws on the HDD backplane and 4 screws on the HDD
backplane tray).
Step 4
Repeat step 1 to 3 to remove the second HDD
backplane module.
4 brackets with 2 screws each