Chapter 5 BMC Configuration and Settings
90
Apollo User's Manual
a
LAN Destination Tab
This page is used to configure the LAN destination of PEF
configuration. A sample screenshot of LAN Destination Page is given
below.
The fields of PEF Management – LAN Destination Tab are explained
below.
LAN Destination:
Displays Destination number for the newly
configured entry (read-only).
Destination Type:
Destination type can be either an SNMP Trap or an
Email alert. For Email alerts, the 3 fields - destination Email address,
subject and body of the message needs to be filled. The SMTP server
information also has to be added - under Configuration->SMTP. For
SNMP Trap, only the destination IP address has to be filled.
Destination Address:
If Destination type is SNMP Trap, then enter
the IP address of the system that will receive the alert. Destination
address will support the following:
• IPv4 address format.
• IPv6 address format.
Subject & Message: These fields must be configured if email alert is
chosen as destination type. An email will be sent to the configured
email address in case of any severity events with a subject specified
in subject field and will contain the message field’s content as the
email body.
Send Test Alert: To send sample alert to configured destination.
Note :
Test alert can sent only with enabled S MTP configuration. SMTP
support can be enabled under Configuration
SMTP.
