Chapter 5 BMC Configuration and Settings
73
Apollo User's Manual
5.4.4.9 Network
In MegaRAC GUI, the Network Settings Page is used to configure the
network settings for the available LAN channels.
To open Network Settings page, click
Configuration→Network
from
the menu bar. A sample screenshot of Network Settings Page is
shown below.
The fields of Network Settings page are explained below.
LAN Interface:
Lists the LAN interfaces.
LAN Settings:
To enable or disable the LAN Settings.
MAC Address: This field displays the MAC Address of the device. This
is a read only field.
IPv4 Settings: This option lists the IPv4 configuration settings.
Obtain IP Address automatically:
This option is to dynamically
configure IPv4 address using DHCP (Dynamic Host Configuration
Protocol).
IPv4 Address, Subnet Mask, and Default Gateway:
These fields are
for specifying the static IPv4 address, Subnet Mask and Default
Gateway to be configured to the device.
Note :
-IP Address made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.
-Each Number ranges from 0 to 255.
-First Number must not be 0.
