Chapter 5 BMC Configuration and Settings
111
Apollo User's Manual
Server Address: This field is to specify the remote server address to
log the system events.
Audit Log:
To enable or disable the audit log.
Save: To save the configured settings.
Reset:
To reset the previously-saved values.
Procedure
1. In the
System Log field, enable or disable the option.
2. Select the
Log type
: Local Log or Remote Log.
3.
If Local log is selected, enter the file size in the File Size field and
rotate count in the
Rotate Count field.
4. If remote log is selected specify the
Server Address
of the remote
server, where the system events are logged.
5. In the
Audit Log
field, check or uncheck the
Enable
option as
desired.
6. Click
Save
to save the changes.
7. Click
Reset
to reset the entries.
Steps to configure the remote server to enable syslogging
On FC machine, disable the following lines for UDP in /etc/rsyslog.
conf.
1. MODLOAD imudp
2. UDPSERVER 514
Note :
Server address will support the following:
- IPv4 address format.
- FQDN (Fully qualified domain name) format.
Note :
This example uses FC13 as the remote machine to log syslog.
Note :
If Remote log is selected, the fields file size and rotate count need not be
mentioned.
