Chapter 5 BMC Configuration and Settings
53
Apollo User's Manual
4. Specify the Domain Name for the user in the
User Domain Name
field. E.g. MyDomain.com
5. Specify the time (in seconds) to wait for Active Directory queries
to complete in the
Time Out field.
6. Configure IP addresses in
Domain Controller Server Address1,
Domain Controller Server Address2 & Domain Controller Server
Address3�
7. Click
Save
to save the entered settings and return to Active
Directory Settings Page.
8. Click
Cancel
to cancel the entry and return to Active Directory
Settings Page.
To add a new Role Group
9. In the Active Directory Settings Page, select a blank row and click
Add Role Group
or alternatively double click on the blank row
to open the Add Role group Page as shown in the screenshot
below.
Note :
-Default Time out value: 120 seconds.
-Range from 15 to 300 allowed.
Note :
IP address of Active Directory server: At least one Domain Control-
ler Server Address must be configured.
-IP Address made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx
”.
-Each number ranges from 0 to 255.
-First number must not be 0.
-Domain Controller Server Addresses will supports IPv4 Address
format and IPv6 Address format.
