Chapter 5 BMC Configuration and Settings
77
Apollo User's Manual
Default Interfaces: Bonding interfaces for configuring active slave(s).
Auto Configuration:
To configure the interfaces in service
configuration automatically.
Save:
To save the current changes.
Reset: To reset the modified changes.
Procedure
1. Select the Default Interface from the drop-down list.
2.
Check the Enable option to enable the Auto Configuration.
3.
Click Save to save the configuration.
4.
Click Reset to reset the configuration.
Note :
If Auto configuration is disabled, then interfaces in services can be
configured via IPMI command.
If Auto configuration i s enabled, then all the services will be
restarted automatically.
Note :
The Network Bonding option is enabled. You can disable the option
if needed.
Note :
The Default Interface can be selected only if the Network Bonding
is enabled.
