Presto Master
10/11/2016
Copyright
©
Agricultural Instruments Corp (AIC)
16
Presto Master Menu Screens
Screen # 5
Screen # 6
Stall PK
Next
Start / Stop
Peak Temp
Monitor Wash
= Wash Screen
Stall PK
= Stall # that had the highest wash solution
Temperature
Stall Seconds
= The stall number that had the lowest
number of seconds over the wash temperature
threshold
Nex
t = Takes you to the next screen
Start /Stop
= Will start the wash cycle. Signals to
all Presto units to Start or Stop wash
# / #
= Number of Stalls in Wash / total number of
stalls
# / #
Stalls Seconds
Screen Currently In
Peak Flow Rate
Next
Stall Being Viewed
Milking Time
= Minutes and seconds since milk was
first seen by the flow cell. The timer begins when the
operator has activated the right switch and the
Presto
Control
enters milking mode. The milking timer will
stop when the detach milk flow threshold has been
detected or when MAX MILKING TIME has
elapsed.
Milk Yield
= meter results in pounds or kilograms.
FlowCell Temperature
= Shows either average or
peak temperature at the flow cell depending on how
the is set-up.
Average and Peak Flow Rate
= shows the 5
second average of milk flow rate and the peak flow
rate. When milking is completed, the shows the
calculated average flow rate over the entire
milking.
SCC “Flag
” = arrow appears for 5 seconds
whenever conductivity is reaches the threshold.
SCC Indicator
= Shows SCC condition
NORMAL, CAUTION or WARNING.
Next
= Takes you to the next Screen
SCC “Flag”
Milking Time
Milk Yield
Flow Cell Temperature
Avg. Flow Rate
SCC Indicator
