Presto Master
Copyright
©
Agricultural Instruments Corp (AIC)
3
Physical Specifications
Case:
Impact-resistant polysulphone with scratch-resistant Lexan ™ front label. Size 4.5” x
6.5” x 2.0”, Weight less than 16 ounces (454 grams).
FlowCell:
Approved P-1700 Polysulfone materials and 304 stainless steel sensing probes.
Shape is a modified elbow, approximately 3” x 2.5” suitable for use with all 5/8” ID
milk hose.
Environment
: Our proprietary enclosure is o-ring sealed against water and chemicals to permit
use in all parlors and stanchion barns.
Various stainless steel brackets and mounting plates are available to adapt the into any milking
system.
Never allow petroleum-based fly spray or other petroleum-based
products to come into contact with the control box or flow cell.
These products will damage the plastic.
Power Requirements
Power Conversion: P = power (watts), I = current (amps), V = (volts)
Amps
(I) =
watts
(P)
divided by volts
(V)
Volts
(V) =
watts
(P)
divided by amps
(I)
Watts
(P) =
amps
(I) x
volts
(V)
Power Input:
17-30 Volts DC continuous power. The circuit board consumes about 2.5 watts. This
does not include any electric valves that may accompany the
Presto
. The voltage
delivered to external valves or solenoids is the same as the input voltage. Therefore,
care should be taken to be sure the supply voltage matches the specifications of the
valves or solenoids.
Hangers and mounting brackets are included but not shown. When the
Presto Detacher is installed in a parlor, stainless steel enclosures and/or
mounting brackets are ordered as needed. For the job.
Technical Specifications
CAUTION
NOTICE
