Presto Detacher
™
© 2012 AIC WAIKATO LLC
608-526-6882
52
Power-up
At power up the Presto Control goes through a self diagnostics test and flashes it’s indicator lamps
on for about 2 seconds. At the completion of diagnostic self-testing, the following screens will
appear.
The after the power up screen above is shown, the Presto will place itself into the
mode it was last in when it was powered down. For example, if when powered down
the Presto where in washing when powered up again it will enter the wash mode.
The right switch
acts as an ATTACH/DETACH function during meter operation, and as a MODIFY
function during setup.
The left switch
operates as a MANUAL/AUTO and when in the set-up mode the continue button.
Activating both switches simultaneously when detached allows the user to review data storage and
setup. Activating the left switch for more than 4 seconds will allow the unit to enter wash mode.
While in the detach mode, activating the right switch for more than 4 seconds will change the group
(if the number of groups is not-zero). The milking screen of the
Presto Control
displays the
following screen and information.
NOTICE
Presto Control Operation
