10
© 2022 • Advanced Healthcare Technology Ltd. • BabyPod 2 ®
Section 5
Safety inspection of BabyPod 2 cont.
Section 5.3 - Re-assembly of BabyPod 2 cont.
Beginning with the ‘Front end’ and ‘Rear end’ sections, place Shock Absorbent Foam pieces inside the
interior of BabyPod 2.
Attach the 4 Infant Positioning Straps, one at each end of each interior locating rail using the
pre-stitched hook material, sliding under the rail and back onto itself.
Insert the “Side” foam panels, being sure to locate the end of each into the recesses in both the “Front
end” and the “Rear end” sections already in place. When foam is properly located, secure “Side” foam
to the BabyPod 2 interior with the attached loop to each side.
