15
© 2022 • Advanced Healthcare Technology Ltd. • BabyPod 2 ®
Section 6
Operating Instructions cont.
1.
Locate metal disc and grasp with thumb and forefingers of both hands.
2.
Flex (bend) disc rapidly until crystals begin to form.
3.
Massage pack to soften and to increase the activation rate.
4.
After pack is fully activated, indent centre with palm to form a small nest.
5.
Lay infant in nest on fabric surface.
6.
Check infant skin for redness and monitor core temperature regularly.
Note: The TransWarmer Infant Transport Mattress is a single-use, disposable product. Discard after
each patient use. To order more TransWarmer Infant Transport Mattress, contact our Customer Service
Department at:
Tel: +44 (0)1992 535933
Email: [email protected]
Section 6.4 - Placing baby inside BabyPod 2
Place the baby in the BabyPod 2 with either head or feet in ‘front end’ section of the BabyPod 2. The orientation of
the baby shall be determined by the clinician based on the monitoring and medical aid requirements of the baby
during transportation and the layout of the transport vehicle.
Place baby face-up on the non-woven surface of the TransWarmer Infant Transport Mattress.
DO NOT
place a baby
directly onto the printed side of the TransWarmer mattress.
Section 6.3 - Activating the TransWarmer Infant Transport Mattress
Warning
Patients may be harmed by the incorrect use of this device.
Warning
DO NOT use the TransWarmer Infant Transport Mattress in ambient temperatures greater than 28.0 degrees Celsius.
Ambient temperatures greater than 28.0 degrees Celsius may cause Warmer Mattress to become
too hot and cause injury to the infant.
