14
© 2022 • Advanced Healthcare Technology Ltd. • BabyPod 2 ®
Section 6.1 - Securing BabyPod 2 to Transport Stretcher or Gurney
The Side Straps attached to the Stretcher Fixing Strap Anchors are used to secure BabyPod 2 to the stretcher or
gurney or to hand carry the device.
Position BabyPod 2 in the centre of the stretcher making sure that it is facing in the proper direction. The ‘Front
end ‘ of BabyPod 2 should be placed at the head of the stretcher.
Note: See direction of travel arrow on the outer shell of BabyPod 2.
Feed one Side Stretcher Fixing Strap at the ‘front end’ and one at the ‘rear end’ of the BabyPod 2 underneath the
stretcher base and attach the male latch on the strap to the female anchor buckle affixed to the opposite side of
BabyPod 2.
Connections are secure when a click is heard
. Pull on the webbing away from the slider buckle to
tighten straps.
Feed the long portion of the End Stretcher Fixing Strap underneath the foot bar of the stretcher and back through
the metal slider buckle. Grasp the webbing and pull away from the slider buckle to tighten the strap. Make sure
that the End Strap is securely tightened around the stretcher foot bar.
Re-check the security of all Stretcher Fixing Straps to ensure patient safety before transport!
Section 6.2 - Opening BabyPod 2
Release the black turn knobs mechanism at both ends of the BabyPod 2, and open the viewing lids being careful
not to bump the viewing lid on any surrounding objects.
Section 6 - Operating instructions
Section 6
Operating instructions
Caution
Always use two hands to lift Viewing Lid and exercise extreme caution
not to drop the lid onto the BabyPod 2 from its raised position.
Warning
Improper handling and use of the Viewing Lid mechanism risks harm to the device and to the patient.
Warning
Carefully inspect BabyPod 2 between each use. A damaged device may harm patient.
Warning
Patients may be harmed by the incorrect use of this device.
