1.800.627.4499
20
SA-Series
CORE ARRAY
Install Insulated Plenum Divider panels. Insulated Plenum Dividers are attached to the leading
edges of the cores with 1/4"–20 Bolts and Nuts (no washers) and fastened to the support posts
with #8 x 1/2" Screws. See Figure 5.4.5.
Continue stacking and joining cores, two core levels at a time until all cores are installed for SA
Series unit heights 3H, 4H and 5H. Top cores will not have attaching flanges. Refer to Figure
5.3.2 on page 17. For SA Series unit heights 6H, 7H and 8H you will continue stacking the cores
later in the assembly process.
Install Posts at all four corners and at the centerline of each base module, where the Insulated
Plenum Divider will be located. Posts are installed with two 1/4"–20 Bolts and Nuts; and four
Flat Washers. See Figure 5.4.4.
FIGURE 5.4.4 INSTALL POSTS
FIGURE 5.4.5 INSTALL INSULATED PLENUM DIVIDERS
www.renewaire.com (800) 627- 4499
www.renewaire.com (800) 627- 4499
NOTE: If a ladder
must be placed on
the base modules,
protect the mod-
ules by placing a piece of
plywood or cardboard
on the floor, under the
ladder legs.
OVERVIEW
