19
1.800.627.4499
SA-Series
CORE ARRAY
When the cores are stacked two rows high, install Core Joining Straps and Connector Brackets
on adjoining cores to stabilize the assembly as it goes forward. Use drift pins and C-clamp
pliers as needed to align and hold Core Joining Straps in position and then bolt the pieces
together with 1/4"–20 Bolts with Nuts (no washers). Core Joining Straps and Connector
Brackets are installed on one face (elevation) only. See Figure 5.4.3.
FIGURE 5.4.2 ATTACH CORES TO BASES
FIGURE 5.4.3 INSTALL CORE JOINING STRAPS AND CONNECTOR BRACKETS
www.renewaire.com (800) 627- 4499
When the cores are stacked 2 rows high, install #8 x 1/2" Screws through the alignment angles
on the floor of the Base Assemblies into the cores themselves. Secure all 4 bottom edges of all
installed cores. Install #8 x 1/2" screws through Horizontal Core Brackets to secure stacked
cores. See Figure 5.4.2.
www.renewaire.com (800) 627- 4499
INSTALL 3 #8 X
1/2" SCREWS ON
ALL BASE CORE
BRACKETS AND
HORIZONTAL CORE
BRACKETS ON ALL
FOUR FACES OF
CORES
OVERVIEW
