AHRI RenewAire SA Series Installation, Operation And Maintenance Manual Download Page 18 | Manualshive

Page: 18 / 24

background image

1.800.627.4499

18

SA-Series

CORE ARRAY

5.4 SA SERIES UNIT ASSEMBLY

All base modules are identical in construction. Place them in their final location and bolt the
modules together using the 3/8" Bolts, two Washers and Nuts. See Figure 5.4.0.

Adjust the location of the assembled base modules, as needed.
Use a 4' level and carefully check the assembled base modules for level. Use galvanized sheet
metal shims under the joining bolt locations and all four corners to level the base assembly.

The base assembly must be within 1/16" of level in 4' in any direction. Check to make

sure there is not a high spot in the floor beneath the modules which may cause the base

modules to rock.

Begin stacking the Bottom/Middle Cores on the base modules. These cores have horizonal
joining straps installed on the top of the cores. All cores are omni-directional and may be turned
any direction. Stack two cores that have the horizontal joining straps on them on each base
module. See Figure 5.4.1.

www.renewaire.com (800) 627- 4499

[email protected]

FIGURE 5.4.0 BASE ASSEMBLY

NOTICE

Use extreme care when handling the cores. Apply protective cardboard to the faces of the
cores as soon as they are installed.

Do not lean ladders or other objects against the cores or the completed assembly, either during

assembly or when the unit is completed. Do not place ladders on the unit base assemblies.

CAUTION

www.renewaire.com (800) 627- 4499

[email protected]

FIGURE 5.4.1 CORE STACKING

OVERVIEW

«
...
16
17
18
19
20
...
»

Summary of Contents for RenewAire SA Series

























Reviews:

No comments

Related manuals for RenewAire SA Series

Brand: J.Burrows Pages: 3

Brand: J.Burrows Pages: 2

Brand: ofichairs Pages: 3

Brand: J.Burrows Pages: 4

DONCASTER JBDONHBMBK

Brand: J.Burrows Pages: 10

Brand: J.Burrows Pages: 9

Brand: J.A.Y. Furniture Pages: 8

Brand: Jar Furniture Pages: 7

Brand: VEDUM Pages: 6

Brand: nardi Pages: 3

Brand: Narbutas Pages: 3

Adult Picnic Table

Brand: NBB Pages: 8

Brand: H2 Pages: 4

Brand: Forte Pages: 37

Brand: PHI VILLA Pages: 12

Brand: modway Pages: 4

Brand: KidKraft Pages: 9

Brand: Southern Enterprises Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands