3
location
This water heater should be located as close as possible to a power
supply and to the main use of hot water. This location must not be
subject to freezing temperatures. The water heater should be posi-
tioned so that the electrical junction box, element, and thermostat
access panels can be opened for inspection, adjustment, and servic-
ing of the elements and thermostats. The drain valve must also be
accessible. The water heater must be located close to a suitable
free-flowing floor drain. Where a floor drain is not adjacent to the
water heater, a suitable drain pan must be installed under the water
heater (see figure 2). This drain pan should be at least four (4)
inches (10.2 cm) larger than the diameter of the water heater, and at
least two (2) inch (5.1 cm) deep providing access to the drain valve.
This pan must be piped to a suitable drain to prevent damage to
property in the event of a water leak from the piping, the relief valve,
or the water heater. Suggested clearances for service purposes are
twelve (12) inches (30.5 cm) from the top and thirty (30) inches (76.2
cm) in front of the unit.
sooner or later, all water heaters leak. the manufacturer,
based on national building codes has given the necessary
advice to prevent damage to the building. under no cir-
cumstances is the manufacturer to be held liable for any
water damage in connection with this water heater.
Should this water heater be installed on carpeting, the carpeting must
be protected by a wood or metal panel beneath the water heater. This
panel must extend at least three (3) inches (7.6 cm) beyond the width
and depth of the water heater. Should the water heater be installed in
an alcove or closet, the entire floor area must be covered by the
panel.
INSTALLATION INSTRUCTIONS
F
G
C
B
E
A
D
SPECIFICATIONS
Models
Storage Capacity
U.S. gal. L Imp. gal.
A
Inches (cm)
B
Inches (cm)
C
Inches (cm)
D
Inches (cm)
E
Inches (cm)
F
Inches (cm)
G
Inches (cm)
105
48.6
184
40.5
3
1/8
(7.9)
40
3/16
(102.1) 49
1/8
(124.8)
4
7/8
(12.4)
50
11/16
(128.7) 26
1/4
(66.7)
22 (55.9)
108
73.7
279
61.4
3
1/8
(7.9)
51
3/8
(130.5) 59
5/8
(151.4)
4
7/8
(12.4)
60
7/8
(154.6)
28
1/4
(71.8)
24 (61)
112
119.0
451
99.1
4 (10.2)
56
7/16
(143.4) 67
1/4
(170.8)
6 (15.2)
68
5/8
(174.3)
32
7/16
(82.4) 28
3/16
(71.6)
figure 1
