Ahlborn ALMEMO 204, Operating Instructions Manual, Page: 28 / 72

11. Measuring menus
11.3 Measuring points list menu
The best overview of all measuring points with
measured values and function values is obtained
via the menu ''
Meas. points list
.
This menu can be combined with selected
functions:
When the list is first called up it appears with maximum six
Meas. points list: Range
measured values, the units, and measuring range:
0.0: 423.12 g/m³ DIGI ...
The measured value can be linked to a series of functions
by pressing keys:
< F >
,
< F >
...
Measured value with units (maximum 6 characters) and Meas. points list: Comments text
comments text (maximum 20 characters)
0.0: 423.12 g/m³
AH, dv abs. humidity
Measured value with maximum value
Meas. points list: Max value
0.0: 23.12 °C 32.67
Measured value with minimum value
Meas. points list: Min value
0.0: 23.12 °C 19.34
Measured value with average value
Meas. points list: Average val.
0.0: 23.12 °C 25.45
Measured value with limit value, maximum
Meas. points list: LV-Max
0.0: 23.12 °C 30.00
Measured value with limit value, minimum
Meas. points list: LV-Min
0.0: 23.12 °C 20.00
To select further measuring points press
<M> :  or  ...
11.4 User menu U2 - data logger
If a plug-in memory is connected at socket A2,
user menu
U1 process control
switches auto-
matically to user menu
U2 Data logger
. This
menu can be used either on its own or just like
any measuring menu in conjunction with the
function menu
Data logger functions
(s. 14.5).
The device status is displayed by certain sym-
bols in the status bar (s. 9.2). Data acquisition can be set to cyclic via the save-
to-memory cycle. The save-to-memory cycle depends on whether in the data
logger functions the memory is activated with the output cycle or with the scan
cycle (s. 14.5.7). This switchover can also be performed easily and conve-
niently in this menu using the softkeys. The available memory is displayed in
the function
Memory free
(s. 14.5.6).
To set save-to-memory cycle as output cycle with saving:
Memory cycles:
00:00:02 s
To set V6 to scan cycle as 'scan time':
<SCANT>
s. 16.7.2
To set D7 to scan cycle as 'minimum time':
<MIN>
s. 16.7.2
28 ALMEMO ® 204
© COM REC l©©l R01 * ´´´´´´µµµµ¶
0.0:
27.6
°C
NiCr Temperature º
Memory cycle: 00:00:02 s
Memory free: 518.31 MB
START MENU M ©©F FCT