Trouble-shooting
Check to ensure that all devices are assigned different addresses.
Address all devices individually via the terminal using command ´
Gxy
´.
Addressed device is OK if at least ´
y CR
LF
´ is returned as echo.
If transmission is still not possible, unplug the networked devices.
Check all devices individually on the data cable to the computer. (see
above)
Check the wiring for short-circuit or crossed wires.
Check that all network distributors are supplied with power.
Network the devices again one after the other and check successively.
(see above)
If, after performing the above-listed checks and remedial steps, a device still
fails to behave as described in the operating instructions, it must be returned to
our factory in Holzkirchen, accompanied by a brief explanatory error descrip-
tion and if available test printouts. With the ALMEMO-Control software you can
print out screenshots showing the relevant programming details and save and /
or print out a comprehensive 'function test' in the device list or terminal mode. .
19. DECLARATION OF CONFORMITY
Ahlborn Mess- und Regelungstechnik GmbH declares herewith that measuring
instrument ALMEMO
®
204 carries the CE label and complies in full with the re-
quirements of EU directives relating to low voltage (2014/35/EU) and to elec-
tromagnetic compatibility (2014/30/EU).
The following standards have been applied in evaluating this product.
Safety standards
EN 61010-1: 2010+A1
Electromagnetic compatibility
EN 61326-1: 2-3: 2013 table 2
If a product is modified in any manner not agreed with us in advance, this dec-
laration becomes void.
When using the sensor with an extension care must be taken to ensure that
wiring is not laid alongside or close to high-voltage power cables and that it is if
necessary properly shielded so as to prevent spurious interference being in-
duced in the system.
The following advisory notes must be observed when operating the device.
Using the device in strong electromagnetic fields may aggravate measuring er-
rors. After exposure to such irradiation ceases, the device should resume op-
eration within its technical specifications.
ALMEMO
®
204
63
Summary of Contents for ALMEMO 204
Page 72: ...20 Annex 72 ALMEMO 204...
