Anti-electromagnetic interference requirements
1. Keep away from Motor, ESC and other high-power equipment
2. Keep away from high current power supply cables, power distribution board and
other components may cause electromagnetic interference
3. Keep away from radio transceivers with high radiant power.
The metal shell of SAGI system comes with better anti-interference feature. But we still
recommend user to avoid possible electromagnetic field interference during installation. The
magnetic compass is very sensitive to magnetic fields, so it is susceptible to abnormal magnetic
field interference which may affect data accuracy.
GNSS antenna installation requirements
1. GNSS antenna should be well connected to FC’s SMA connector. Antenna should
be led out to the top of the drone body, signal receiving surface (black plastic cover)
should be parallel to the ground and facing upto achieve the best performance.
Make sure no other metal components around the antenna.
2. GNSS should be far away from magnetic field, electric field, engine, servo, high
current wires, data link and transmitter
For users who wants to use their own GNSS antenna, please remove the magnet on
the back of the GNSS antenna to avoid any interference caused to the flight
controller.
Data link antenna installation requirements
1. Datalink antenna(feeder) should be well connected to “DATA LINK”SMA
connector. The antenna should be exposed to the drone body. Trying to make
sure the antenna is not blocked by materials with electromagnetic shielding
properties such as metal and carbon fiber.
2. The antenna should be mounted straight up or down to get a longer horizontal
transmission distance
Structural interference requirement
1. Please reserve a certain space for cables,assembling and disassembling
operations according to the real situation. That is used to prevent the flight
controller from colliding with the drone body or other equipment.
2. Avoid dragging and pulling the flight control.