For example, when connecting nacelle to COM5, user can make self-recovering fuses
connected in series with its GND cable. This will ensure flight controller will not be
affected by external equipment failure.
Please ensure that the voltage or power input and output between all pins meet the above
requirements, otherwise the flight control or other avionics equipment will be burnt.
Please ensure GND cables are connected without any differential pressure(all avionics, including
flight controller), otherwise the flight control or other equipment will be burnt.
If using an RTK GNSS device (eg DG1, etc.), please use the dedicated GND as listed in the table
to avoid possible interference.
The voltage of P1+ and P2+ must be same if supply power at same time.
Equipment connection rules