7.
Navigation Quick Start Guide.
All Aguri sat navs come preloaded with your choice of UK & Ireland or Pan European mapping plus the Speedshield speed trap
database, so they are ready to use straight out of the box.
1.
Insert the SD card if the SD card is not already installed. When you first power on the device t
he unit will automatically
sychronise with the SD card. At this point the SD card will not function with any other device. If the unit does not activate when
you turn it on it may require charging which you can do by using the vehicle charger or USB cable. Once the unit is fully charged
the LED will turn blue.
2.
Install the device in your car using the windscreen bracket provided.
Ensure that the unit has a clear view of the sky and does
not interfere with the vehicles controls. Clean the area of the windscreen where you want to mount your unit and then attached
the windscreen bracket making sure that it is securely attached. Finally insert the device in to the windscreen bracket and adjust
it so that you can easily view the display and safely reach the touch screen.
3.
Connect the vehicle charger and power the device on by pressing and holding the power button.
Follow the on-screen
instructions to launch the navigation software. Please note that it can take a few minutes for the unit to achieve a satellite lock
the first time you use it so it is best to remain stationery to ensure the fastest result. Subsequent start-ups will be much faster
however and your device will locate satellites within a few seconds when using it regularly. Once satellite lock is achieved, the
screen will indicate your current position and direction of travel on the map.
4.
Calculating a route using a post code.
Touch the centre of the screen to enter the menu. Select ‘Route by post code’. Enter the
post code details of your destination where indicated and press ‘OK’. Press ‘Calculate’ and the unit will determine the fastest
route from your current position to your chosen destination.
User note. Truck and Motorhome & Caravan editions only.
If you have the Truck or Motorhome & Caravan edition, an additional screen will be displayed at this point asking you to select your vehicle type. If
this is the first time you have used the device you will need to enter the attributes of your vehicle now. More details are about how to set-up and
enter your vehicle attributes can be found later in this manual. Once your vehicle details have been entered, your device will calculate a route
based on the attributes saved.
