37.
User speed alert
You can set E-Speed to alert you if you accidentally exceed a speed limit. To set the User speed alert warning use the up and down arrows to increase
or decrease the speed, above the speed limit, you would like to be alerted at, and then press “OK” to save.
Tight bend alert.
Truck and Motorhome & Caravan editions only.
You can set the unit to alert you if you as you approach a tight bend. To select this function choose either the “Yes” or “No” button and press “OK” to
save.
GPS status
This function allows you to check the strength of the unit’s GPS connection at any time. You can also see the exact coordinates of your current
position by using this feature as follows:
Press the middle of the screen to access the “Navigate” menu. Press “Device settings” and then scroll until you see the “GPS status” icon and press it
once. Your current GPS status will be displayed. You can reset the GPS engine to the factory default by pressing the “Reset” button.
Version
Check here for information about your device such as the software and hardware version numbers.
Press the middle of the screen to access the menu and press the “Device settings” button. Scroll until you see the “Version” button and press it once.
The following device information will be displayed.
Hardware – Hardware version number
Software version – Software version number
Map version – Map version number
Speedshield database - Date the Speedshield speedtrap database was last downloaded
Serial number – serial number of device.
Show POI
Use this function to choose which POI (Point of interest) icons you want to display on the map. The default setting shows all POI icons on the map, but
you can choose to display only the ones you want or none at all.
Press the middle of the screen to access the “Navigate ” menu and press the “Device settings” button. Scroll until you see the “Show POI” icon and
press it once. Select the POI’s you would like to display on the map and press OK to save.
