36.
Touch sounds
This option allows you to choose if you want a beep tone to be emitted each time the LCD is touched. To make your selection, choose either the
“Yes” or “No” button. To save the changes press “OK” at the bottom of the screen.
Route alarm
If you deviate from a calculated route the unit will automatically recalculate a route. To indicate that re-routing is in progress the unit will emit an
audible tone. This option allows you to choose if you want a beep tone to be emitted during recalculation. To make your selection, choose either the
“Yes” or “No” button and press “OK” to save.
Auto scale
Auto scale automatically magnifies the map on the screen as you approach a junction or roundabout so you can see it in more detail. Auto scale is
switched “On” as the default setting. This option allows you to choose if you want auto scale on or off. To make your selection, choose either the
“Yes” or “No” button and press “OK” to save.
E-Speed
E-Speed contains speed limit information on nearly every road in Europe which can be displayed on your unit. You can select the correct speed limit
for your vehicle type as follows:
Car – Advisory speed limits for a car will be displayed
Caravan – Advisory speed limits for a vehicle towing a caravan will be displayed
Motorhome – Advisory speed limits for motor homes will be displayed
Truck 3.5t – 7.5t – Advisory speed limits for this size of truck will be displayed
Truck 7.5t – 12t – Advisory speed limits for this size of truck will be displayed
Truck 12t and above – Advisory speed limits for this size of truck will be displayed
To make your selection, choose the option you require and press the “OK” button at the bottom of the screen to save your changes.
Note – These are advisory speed limits only and are subject to change. It is the driver’s responsibility to check local speed limits and abide by local
driving regulations at all times.
