Agu Minimill N7, Instruction Manual

Page: 58 / 115

58
CLEANING AND DISINFECTION
If the device is not cleaned and disinfected correctly and frequently as indi-
cated, microorganisms may remain in the unit and cause risk of infection.
AFTER EVERY USE:
Clean the medication cup with distilled water after each inhalation.
• Pour out the residual solutions in the medication cup.
• Pour some distilled water into the medication cup.
•
Turn on the device to nebulize the distilled water for 1 to 2 minutes to clean
the mesh.
• Remove batteries or disconnect the adapter from the main unit.
•
Remove the medication cup from the main unit.
•
Wash and rinse the medication cup with distilled water.
• Shake off excess water and allow parts to be fully air dried on a clean, dry towel.
• Use gauze or clean towel to wipe off stains on the main unit if necessary.
•
Make sure that all cleaned parts are completely dry before you store them or use
them next time.
WARNINGS
•
Keep the battery compartment stay in dry all the time.
•
DO NOT poke the mesh with finger, cotton swab or any objects.
• DO NOT clean parts in a dishwasher.
• DO NOT use microwave to dry any parts.
DAILY DISINFECTIONS
It is important to disinfect the medication cup on a daily basis.
1. Disinfection by boiled water
•
Rinse the medication cup with distilled water.
• Bring a saucepan of DISTILLED water to the boil.
• Carefully immerse the medication cup in the boiled water for a maximum
five (5) minutes.
• Carefully remove the medication cup from the boiled water and shake off
excess water.
•
Allow parts cooling down and fully air dry on a clean, dry towel, and out
of reach of children.
•
Make sure that all parts are clean and dry before storage or use.