Agromehanika AGS 2500 EN-HP, Instructions For Use Manual

Page: 28 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
18
Lift the support leg of the
sprayer
(figure 4) by rotating the handle (2), unhook the pin (2),
remove the bolt (3), move the support leg (1) on the holder of support leg on the base, insert
bolt and pin and use the handle to lift the bottom part of the support leg. Then connect the
pump’s shaft on the
sprayer
and tractor shaft with a cardan shaft.
When positioning the
sprayer
in parking position, perform the procedure in reverse order.
WARNING: Be careful, when connecting the
sprayer
for the first time:
- Check that the boom of the spraying equipment in transport position does
not come into contact with tractor cabin or any other part of the tractor.
- Drive slowly, when the
sprayer
tank is full (smaller effect on breaking).
Figure 4: SUPPORT LEG
Legend:
1. Support leg
2. Support leg handle
3. Pin bolt
4. R-bolt
If traffic regulations require additional safety with safety rope, tie
the rope around the tractor’s towing hook.