AGS 2500/3000 EN-HP
USER MANUAL – rev.2016/12
page
75
11.7.7
Working width
To enter window "WORKING WIDTH", select icon
and confirm it with confirmation button
. Display shows:
Description:
d1-d7 – width of individual sections
D – total length of spraying equipment
One nozzle represents 0.5 m of working width, if the nozzles are 0.5 m apart.
Working width is, as standard, divided into 7 sections.
If you have 5 sections on the sprayer, then set first and last section to OFF (value 0).
When the section is OFF, the buttons on AG-TRONIK are turned off and are not functioning (dead
button).
If you want to change value of individual section, move selection frame to line, which you want to
change, and press button
. Value starts flashing. Use buttons
and
to set new value.
Use button
to confirm entry. D is sum of widths of sections and cannot be set. It can be adjusted
by changing values of individual sections.
If you have finished with entries, press button
to return to basic menu.
If one nozzle on section was manually closed, new working width for this section must be entered.
Otherwise, regulation does not function correctly
11.7.8
General settings
To enter window "GENERAL SETTINGS", select icon
and use confirmation button
to
confirm it. The display shows:
Summary of Contents for AGS 2500 EN-HP
