Agromehanika AGS 2500 EN-HP, Instructions For Use Manual

Page: 101 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
91
11.9.2 Data transfer to computer
When analyses are written on the card, they can be viewed on a personal computer. You need
a SD card reader, if you do not have an appropriate SD card slot on your computer. Content
on SD card is read by the computer automatically.
File format is TXT type and can be viewed in programs Notepad, Word, Excel and in
programs, which read TXT files.

Notepad printout:
When opening a file in Notepad, the file appears as following form:
BEGIN marks the start/continue of
specific ANALYSIS, and END marks
cancel/end of ANALYSIS. Each cancel
makes a new start and end of specific
ANALYSIS.
Printouts are prepared so that they are all
gathered under one lot. If you have
selected lot name JANEZ1, then all
analyses, which have been written under
JANEZ1, are gathered in one file, in our
case file JANEZ1. Analyses are sorted in
descending order according to date and
time. If you have chosen new nozzles,
such as in case of lot JANEZ1 (ID nozzles
were replaced with nozzles ST/LU), and
you have done this with “cancel work”,
two .TXT files appear, as in the example
on the left.