Agromehanika AGS 2500 EN-HP, Instructions For Use Manual

Page: 33 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
23
Attach hose

50 mm to fitting (A) and secure with hose clamp. Connect fitting (A) with hose
to connection (B) and secure with side levers (see figure 7). Maximum filling capacity is 250
l/min.
Float valve mechanism, installed on the cover, enables air to escape from the tank, so that
opening of entire cover is not required.
Figure 7: EXTERNAL FILLING OF TANKS
Tank filling procedure:
Connect fitting (A) to connection (B), open external water supply, set lever of selection valve into
position according to which tank you want to fill:
- Position 1 (FILLING OF MAIN TANK)
- Position 2 (FILLING OF RINSING TANK)
When you have filled both tanks, close external water supply, release pressure from the hose by
returning the lever of selection valve to position 1 and unhooking the connected hose.
Connection (B) can also be replaced by other fittings with 2˝ thread (fire clamp).
7.7 Mixing nozzle
Figure 8: MIXING NOZZLE
The sprayer is equipped with mixing nozzles for better mixing,
which are installed on the bottom part of the tank. Mixing
nozzle is supplied directly through centrifugal mixing pump
C200. Mixing is performed always, when the tractor cardan
shaft is engaged. While preparing
crop protection liquid
and
driving to the field, we recommend to engage the cardan shaft,
which consequentially mixes the spray.