Agromatic ESR-NK Series, Installation And Operating Manual, Page: 29 / 98

Actuators NK and VK, Position Controller ESR-NK 23
4 Transportation and storage
The actuator is shipped to the customer by a shipping agent authorized by
the manufacturer.
Important information!
The transport locking device inside the stroke unit must be removed be-
fore putting the device into operation.
4.1 Acceptance inspection by the receiver
The actuator is shipped to the customer in a cardboard box.
If required, wire-mesh boxes are used for the transport (e.g. for delivering
large quantities).
The customer must inspect the actuator for visual transport damage when re-
ceiving the product.
Immediately notify the shipping agent and the manufacturer about any
transport damage detected.
4.2 Packaging, insulation
Packaging used for transporting and protecting the actuator is made of the
following materials, which are suitable for re-use (recycling):
−
Cardboard
−
Styrofoam
−
Polyethylene foil
Important information!
Always recycle packaging and insulation material in an environmentally
friendly manner!