agromaster GS2 1000, Operator'S Manual

Page: 19 / 44

EN TR
Operator's Manual Kullanım Kıla
GS 2
sonucu bulunan , mak e
konularak kontrol . Fazla g ar veya
k , az veya .
7.2.1. G M Fırlatılma Uzak
Uzak tlara e .
G D
(A) F
(B) D
(~120°)
(C) D Halk G
(D) F
(E) Katlama
(W)
• D evre
• D yerden ,
• D yere e konumuna,
• Kanat durumuna,
• G ve
• R durumuna olarak
.
7.3. Şanzıman T
: 29 kg
Y : 1L SAE.90EP
D : 1/1
8. MAK NEN N TRAKT RDEN AYRILMASI
1. Trakt z park el fr ek ve
tekerlere takoz koyunuz.
2. Trakt a
3. Trakt yar mak yere
4. Mak park destek a ve et
tak
5. Mak trakt den a
6. Mak nen zde h drol k hortumlar varsa trakt r h drol k
ve hor ar
7. Mak nen zde elektr k ba lant s varsa trakt r stop
durumdayken ar
8. nokta
W
A
B
C
D
(E)
F .15 ek.15
F .16 ek.16
The value that found after the process is controlled by
some fertilizer into machine. If it thrown away much increase
the tractor speed or close the latch or if it thrown away less,
decrease the speed or open the latch.
7.2.1. Maximum Spreading Distance
It changes according to following conditions;
Spreading of fertilizer
(A) Spreading Distance
(B) Spreading Angle (~120°)
(C) Spreading Circle Width
(D) Spreading width
(E) Doubling width
(W) Working Witdh
• Rotation speed of discs
• Height of discs from land
•Disc position to land
• Vane position
• Structure and type of fertilizer
• Wind condition
7.3. Gearbox Type
Weight : 29 kg
Oil :1 L SAE.90EP
Gear transform :1/1
8. DETACH OF MACHINE FROM THE TRACTOR
1. Park the tractor on a surface, pull the handbrake and put
the wheel chock to tires.
2. Hydraulic arms of tractor should be alignment.
3. Lower the machine by means of the tractor hydraulic arms.
4. Wind up the machine support leg and insert the safety pin
5. If your machine has shaft dismount the shaft from tractor.
6. If your machine has hydraulic hoses depressurize the
pressure through tractor's hydraulic valve and disconnect
the hydraulic hoses from the tractor.
7. If your machine has electric system disconnect the electric
connections from the tractor when tractor is in stop position.
8. Pull out the connection pins.1-2
∅10.2
500 (New Model)
450 (Old Model)
62
∅24,8
110
84
17