9
1. Review the Operator's Manual for the en-
gine.
2. Place all controls in neutral, stop engine
and remove ignition key before maintain-
ing.
3. Allow the engine to cool before changing
the oil. Hot oil can cause burns if it con-
tacts exposed skin. It is best to change
oil while the engine is warm to keep the
contaminants in suspension.
4. Place a pan under the drain plug.
5. Remove the drain and allow the oil to drain
for 10 minutes.
6. Install and tighten the drain plug.
7. Dispose of the used oil in an approved
container.
8. Fill the crankcase with specified oil.
9. Run the engine for 1-2 minutes and check
for oil leaks.
10. If leaks are found around the drain plug,
tighten slightly.
11. Check engine oil level. Top up as required.
.. CHANGING ENGINE OIL
Fig. 0 ENGINE
a. Drain Plug b. Fill Plug
b
a
