7. Disconnect the throttle control from
the engine and lay the control as-
sembly to the side.
8. Mount control assembly to the side of
the blower frame. Tighten fasteners
to their specified torque.
Fig. 3 CONTROL ASSEMBLY
Fig. HITCH
Moving
Mounting
3. Use a forklift to lift the pal-
let/machine from the truck.
Carry the load close to the
ground as it is moved to the
assembly area and posi-
tioned.
4. Remove machine, hitch and
control tie-downs and lay-out.
5. Slide the hitch into the frame
and secure. Tighten fasten-
ers to their specified torque.
Tighten the anchor bolt and
set screw.
6. Place jack in the down posi-
tion.
