5 Maintenance and Repair
Hydrostatic Implement Carrier
agria 5900 Bison
67
Safety circuit
Check the function of the safety circuit before
each startup and during each maintenance work.
•
Travel drive and PTO shaft drive must stop
automatically when the safety lever (B/4) is
released.
•
Standstill occurs automatically when the
clutch is disengaged. The engine continues
running.
•
Check adjustment and function of Bowden
cables on manual safety lever and manual
clutch lever, readjust if necessary, or re-
place.
- agria-Service -
Engine stop circuit
Diesel engine
Check the function of the engine stop circuit
before each startup and during each mainte-
nance work.
•
The engine must stop when the speed regu-
lating lever is in "STOP" position at the stop.
If necessary, adjust the speed / stop bowden
cable at the bowden cable adjusting screw
on the engine.
- agria-Service -
Clutch adjustment
Check adjustment before each startup. Readjust
if necessary (in particular during the running-in
period after initial startup and after the clutch
lining has been replaced).
