5 Maintenance and Repair
Hydrostatic Implement Carrier
agria 5900 Bison
61
Idle speed
Always ensure that the engine
idle speed is adjusted correctly. The
engine
shall
continue
running
smoothly at low speed when the
speed regulating lever is at the stop in
idle position.
-
agria-Service -
Adjusting the valve play
Adjust the valve play after every
400
operating hours. Inlet and outlet valves
0.15 ± 0.02 mm with cold engine.
-
agria-Service -
Injection nozzle
Clean and check the injection
nozzle after every
400
operating hours.
- agria-Service -
Battery
Observe the instructions of the bat-
tery manufacturer!
Charging:
•
Only use suitable DC chargers.
•
For recharging use a charger with
a constant charging voltage of
14.4 V.
•
Ensure good room ventilation.
•
Remove the battery from
the machine. Disconnect the bat-
tery poles, starting at the negative
terminal.
•
Connect the positive terminal of
the battery to the positive output of
the charger, and likewise for the
negative connection.
•
Switch on the charger only after
you have connected the battery.
•
Recommended charging current:
1/10 A of battery capacity Ah.
•
Interrupt charging, if the acid tem-
perature exceeds 45 °C.
•
The battery is fully charged when
the charging voltage has not in-
creased in 2 hours.
