3 Devices and Operating Elements
28
Hydrostatic Implement Carrier
agria 5900 Bison
Service and parking brake
The combined service and parking brake is used
for braking and parking the machine on hilly
grounds.
Service brake
•
Swing the eccentric lever (B/2) up and to the
rear - both driving wheels are braked.
The eccentric lever swings back to its home
position when you release it - the brake is
released.
Parking brake
•
Swing the eccentric lever (B/2) up and to the
rear beyond the dead point. The eccentric
lever stops automatically - both driving
wheels are blocked.
To open the parking brake, swing the eccentric
lever back to the initial position - the brake is
released.
Never drive and brake at the same time.
Before you start moving the machine, ensure
that the brake is released. Failure to do so
can cause damage due to overpressure (fail-
ure of wheel motor).
Steering bar
Adjust the steering bar only when trac-
tion drive and PTO drive are switched off -
risk of accident!
Steering bar height adjustment
•
Press the clamping levers
at both sides
until the notches
are released.
•
Move the left and the right steering bar to
the required height and allow it to engage in
the corresponding notch.
•
Tighten the clamping levers
.
